EPDM Rubber Products
EPDM rubber is a high-density synthetic rubber used for outdoor applications and other spaces in need of tough, versatile parts. With more than half a decade of experience in providing custom rubber solutions for businesses, Timco Rubber can work with you to provide the right EPDM parts for your applications.
EPDM: A Versatile, Cost-Effective Rubber Part Solution
When you need a rubber material that offers excellent resistances to weather, heat, and other factors without breaking the bank, EPDM may be the right option for your part needs.
EPDM – also known as ethylene propylene diene monomer – is an extremely versatile material used in a variety of applications, from automotive products to HVAC parts. This type of rubber also acts as a less expensive alternative to silicone, as it can last for long periods of time with proper use. As such, EPDM can save you time and money depending on the needs of your application.
EPDM Properties
♦ Common Name: EPDM
• ASTM D-2000 Classification: CA
• Chemical Definition: Ethylene Propylene Diene Monomer
♦ Temperature Range
• Low Temperature Usage:-20° to -60° F | -29⁰C to -51⁰C
• High Temperature Usage: Up to 350° F | Up to 177⁰C
♦ Tensile Strength
• Tensile Range: 500-2500 P.S.I.
• Elongation: 600% Maximum
♦ Durometer (Hardness) – Range: 30-90 Shore A
♦ Resistances
• Aging Weather - Sunlight: Excellent
• Abrasion Resistance: Good
• Tear Resistance: Fair
• Solvent Resistance: Poor
• Oil Resistance: Poor
♦ General Characteristics
• Adhesion to Metals: Fair to Good
• Solvent Resistance: Poor
• Compression Set: Good
EPDM Applications
Household Appliance
• Sealing
• Gasket
HVAC
• Compressor Grommets
• Mandrel formed drain tubes
• Pressure switch tubing
• Panel gaskets and seals
Automotive
• Weather stripping and seals
• Wire and cable harnesses
• Window spacers
• Hydraulic brake systems
• Door, window, and trunk seals
Industrial
• Water system O-rings and hoses
• Tubing
• Grommets
• Belts
• Electrical insulation and stinger covers
EPDM Benefits and Advantages
• Resistance to UV exposure, ozone, aging, weathering, and many chemicals – great for outdoor applications
• Stability in high and low temperatures – a general purpose EPDM material can be used in an environment where the temperature range is from -20⁰F to +350⁰F (-29⁰C to 177⁰C).
• Low electrical conductivity
• Steam and water resistant
• Can be fabricated in a variety of ways, which includes custom molded and extruded parts
• Long-term part lifespan allows for fewer replacement parts, saving money in the long run
Interested in EPDM?
Contact us or complete our online form to request a quote.
EPDM Case Study: Switch to Square Tubing Saves Money and Improves Quality
Not sure which material you need for your custom rubber product? View our rubber material selection guide.
Order Requirements