Blog

  • Why choose silicone as the material of your silicone keypads?

    Why choose silicone as the material of your silicone keypads?

    Why choose silicone as the material of your silicone keypads? If you’re in the process of designing your next keypad product and are wondering why you should go with silicone over some other material, we are here to let you in on the many benefits of this versatile optio...
    Read more
  • Do you know the reason why silicone products have long lifespan? Let JWTRUBBER tell you.

    Do you know the reason why silicone products have long lifespan? Let JWTRUBBER tell you.

    Do you know the reason why silicone products have long lifespan? Let JWTRUBBER tell you. Silicone products are almost everywhere in daily life, it is found that the lifespan of silicone products is amazing, even can be described as “tough”. Take silicone phone shell as an example, it is somethin...
    Read more
  • DMC Market Get To The Highest Point Over The Past Decade, 66% Increase Monthly.

    DMC Market Get To The Highest Point Over The Past Decade, 66% Increase Monthly.

    DMC Market Gets to the Highest Point over the Past Decade, 66% Increase Monthly   Summary According to the JWT rubber marketing department monitor, cut off  the date 29th September 2021, The average price of the main silicone DMC market gets to more 62366 yuan/ton, ...
    Read more
  • Why is silicone price booming? Have you gotten the latest news?

    Why is silicone price booming? Have you gotten the latest news?

    Why is silicone price booming? Have you gotten the latest news? Since 2021, the global silicone market demand continues to grow, superimposed on the reduction and withdrawal of overseas capacity. As the new epidemic control, domestic market strong recovery in demand pic...
    Read more
  • Everything You Need To Know About Injection Molding

    Everything You Need To Know About Injection Molding

    Everything You Need To Know About Injection Molding   What is Injection Molding? Injection Molding is a manufacturing process for producing parts in large volume. It is most typically used in mass-production processes where the same part is being created thousands o...
    Read more
  • How Does a Silicone Keypad Work?

    How Does a Silicone Keypad Work?

    How Does A Silicone Keypad Work?     First, let’s figure out what is Silicone Keypad? Silicone rubber keypads (also known as Elastomeric Keypads) are used extensively in both consumer and industrial electronic products as a low cost and reliable switching solut...
    Read more
  • Remote Control For Consumer Electronic Devices

    Remote Control For Consumer Electronic Devices

    Remote Control For Consumer Electronic Devices A remote control is an input device that can be used to control a piece of electronic equipment located away from the user. Remote controls are used in a huge range of consumer electronic devices. Common remote control appli...
    Read more
  • Silicone Keypad Design Rules and Recommendations

    Silicone Keypad Design Rules and Recommendations

    Silicone Keypad Design Rules and Recommendations Here at JWT Rubber we have vast experience in the custom silicone keypad industry. With this experience we have established some rules and recommendations for the design of silicone rubber keypads.   Below are some o...
    Read more
  • Special designing for custom rubber keypads

    Special designing for custom rubber keypads

    Special designing for custom rubber keypads When you are producing a custom silicone keypad, pay careful attention to the way that your keys will be labeled or marked. Many keypad designs do not require marking, such as keypads that will be held in place by a (labeled) b...
    Read more
  • The Benefits and Limitations of Injection Molding

    The Benefits and Limitations of Injection Molding

    The Benefits And Limitations Of Injection Molding The advantages of injection molding over die cast molding have been debated since the former process was first introduced in the 1930s. There are benefits, but also limitations to the method, and that, primarily, is need-...
    Read more
  • The Top 10 benefits of plastic injection molding

    The Top 10 benefits of plastic injection molding

    The Top 10 Benefits Of Plastic Injection Molding If you're reading this blog, I guess you already know a thing or two about plastic injection molding, one of the most popular methods for mass producing plastic parts. To review, this technology consists of feeding plastic...
    Read more
  • TOP 5 elastomers for gasket & seal applications

    TOP 5 elastomers for gasket & seal applications

    TOP 5 Elastomers For Gasket & Seal Applications What are elastomers?  The term derives from “elastic”-one of the fundamental properties of rubber.  The words “rubber” and “elastomer” are used interchangeably to refer to polymers with viscoelasticity-commonly referred...
    Read more
  • What is Rubber Used for: The 49 Places You Will See Rubber

    What is Rubber Used for: The 49 Places You Will See Rubber

    What is Rubber Used for: The 49 Places You Will See Rubber                Rubber has become commonplace! In every American city, international destination, building, machinery, and even on people, it is easy to point to some rubber part. Praised for its elastic quality, ...
    Read more
  • What is the Difference Between Silicone Rubber and EPDM?

    What is the Difference Between Silicone Rubber and EPDM?

    What Is The Difference Between Silicone Rubber And EPDM? When selecting a rubber for use, many Engineers end up needing to make a choice between selecting silicone or EPDM. We obviously have a preference for silicone(!) but how do the two match up against each other? Wha...
    Read more
  • Where does silicone rubber come from?

    Where does silicone rubber come from?

    Where Dose silicone rubber come from?   To grasp the multitude of ways silicone rubber can be used, it is important to realise its origins. In this blog, we take a look at where silicone comes from to understand more about its characteristics.   Understanding t...
    Read more